Product Groups

Ethylene Vinyl Acetate Co-Polimers (EVA)

DUDITERM products are hot melt adhesives of thermoplastic nature based on Ethylene-Vinyl Acetate Co-Polimers (EVA) or on polyolephines. They are solid at room temperature but upon heating they become l uid and are thus applied at the molten state. By cooling they revert back to the solid state giving cohesion and hardness of the glue joint. Thanks to their fast setting and adhesion towards many substrates they are employed for automatic and manual edgebanding, both straight and soft-forming, as well as wrapping of profiles, door-frames, skirtings and window beads.

 Polyolephines Hotmelt

DUDITERM products are hot melt adhesives of thermoplastic nature based on Ethylene-Vinyl acetate co-polimers (EVA) or on polyolephines. They are solid at room temperature but upon heating they become l uid and are thus applied at the molten state. By cooling they revert back to the solid state giving cohesion and hardness of the glue joint. Thanks to their fast setting and adhesion towards many substrates they are employed for automatic and manual edgebanding, both straight and soft-forming, as well as wrapping of profiles, door-frames, skirtings and window beads.

Polyurethane Dispersions Glues

DUDIPUR D adhesives are Durante&Vivan solution to 3D membrane-press panel facing by thermoplastic decorative foils for door and shutter production. DUDIPUR D are polyurethane dispersions that together with suitable crosslinker yield a glue film characterized by high adhesion strength and outstanding heat and water resistance performances. Our company produces both two-components and ready to use, one-component adhesives.

Urea Formaldehyde Glues (UF)

DUROXILL products are thermosetting adhesives derived from the condensation of urea and formaldehyde. They undergo chemical reticulation yielding an insoluble glue joint that cannot be melted. They have many applications in the facing of panels and multi-layer wood for the woodworking and furniture sectors.

Fibre Glass Coating

Thermo-gluethread is constitued by a fibre glass coated with gluing resin, used for veneer splicing. The product range offer different articles based on the heating system of the machines and based on the veneer species.